Basic Function; Making A Call; Making Domestic Calls; Dialing Extension Number Of Fi Xed-Line Telephone - Videocon V1604 User Manual

2

BASIC FUNCTION

2.1

MAKING A CALL

When the logo of service provider appears on the display screen, you
can dial or receive calls. The information bar at the upper left corner
of the display screen shows network signal strength (when there are 5
information bars, the signal is at its strongest).
The call quality is very likely to be affected by obstructions, therefore
movement in a small area can effectively improve the call performance.
2.1.1

Making domestic calls

Enter phone number and then press "Dial" key to make the call. If the user
needs to change the phone number, press "Right Soft" key to delete the
entered numbers. Call state information will be shown on the screen after
the called party ends the call. You can enter and dial domestic call in the
following order:
1. Area code
2. Phone number
3. Dial key
2.1.2 Dialing extension number of fi xed-line telephone
Some extension numbers of fi xed-line telephone cannot be connected
directly, you must dial the power board phone number, then press * key to
power continually, until the screen displays "P" and then dial the extension
number.
You can dial extension numbers of fi xed-line telephone in the following
order:
1. Area code
2. Power board number
3. Extension number (when the screen displays "P")
4. Dial key
2.1.3

Dialing international calls

To make an international call, you may press * key to power continually, till
the screen displays the pre-digit symbol "+" for international long distance
call, which will enable you to make a call from any country without knowing
the local international access code.
You can enter numbers in the following sequence to make an international
call:
1. Country code (when the screen displays "+")
2. Complete phone number
3. Dial Key
10