Haier HCH2100ACS Installation And User Manual page 18

EXTERIOR SURFACES:
To avoid damage to the exterior surface, do not use steel wool or soap-filled
scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
•
Liquid detergent and water, or all-purpose cleanser
•
Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water
and wipe dry.
METAL GREASE FILTER
1. Slide the filter release to the left, and then pull downward to remove the grease
filter.
2. Wash the metal filter, as needed, either in the dishwasher or with a solution of
hot water and dish detergent.
3. Replace the metal grease filter.
CHARCOAL FILTERS (NON-VENTED [RECIRCULATION]
INSTALLATIONS ONLY)
The charcoal filter should last for up to 6 months with normal use. The charcoal filter
is not washable; it must be replaced with a new filter.
TO REPLACE CHARCOAL FILTERS:
1. Follow the previous steps to remove the metal grease filter from the hood.
2. Locate the two studs extending from the top and bottom of the intake on the
right and left side of the blower.
16
a
a
Filter
Release