Before First Use - Electrolux GA60SLVSCN User Manual

12 www.electrolux.com
Options and settings
XtraPower
XtraDry
7.2 How to set an option
The option list will show only the options
applicable to the currently selected
programme. Non applicable options are
not visible.
Some options are not compatible with
each other. When you set 2 options that
are not compatible with each other, the
appliance will automatically deactivate one
of the options.
When the programme is completed or is
cancelled the options are set to the default
values.
1. Press the Option key.
2. Select an option.
The display shows the option value
indicated in parenthesis.
3. Press the OK key to change the value
from OFF to ON or vice versa.
If the selected option is Delay start, when
you press the OK key the display shows
the number of hours available for the delay
start. Select the number of hours and
press again the OK key to confirm.
4. To go back to the programme list,
press repeatedly the Option key until

8. BEFORE FIRST USE

The first time you activate the appliance it
is necessary to set the language. Default
language is English.
1. Set the language.
• Press OK to confirm English.
• Scroll the list of available languages
for a new language and press OK
to confirm.
Values
On
Off (default value)
On
Off (default value)
7.3 TimeSaver
This option increases the pressure and the
temperature of the water.
The washing and drying phases are
shorter. The total programme duration
decreases by approximately 50%.
The washing results are the same as with
the normal programme duration but the
drying results can be less satisfactory.
The TimeSaver option is not applicable to
all programmes.
1. Scroll through the programme list and
2. Press the OK key to confirm.
If the TimeSaver option is applicable to the
selected programme, the display shows
the 2 conditions Fast and Normal and the
programme duration for each condition:
2. Make sure that the current level of
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
Description
The use of this option gives
very good washing results
for heavy soiled dishes. The
water pressure in the pre-
wash and washing phases
is increased.
Activate this option if you
want to boost the drying
performance.
the display shows the selected
programme.
select a programme.
• Fast: TimeSaver activated. Press
the OK key to confirm.
• Normal: TimeSaver deactivated.
Press the OK key to confirm.
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
processing residuals that can still be