Download  Print this page

Advertisement

17 Configuration

Configurable Parameters

The following tables list configurable parameters for each of the sub-menus on the Configuration Main
menu. A description of each parameter is provided, along with the possible choices for settings. Default
settings are in bold type.
Table 24 General Settings
Parameter
Voice Volume
Alarm Volume
Minimum Alarm Volume Minimum audible alarm level available during
QRS Volume
Time Format
Pacing on Batteries
Warning
Unit Display
Patient Category
Device Owner
Return to Owner
Password
Audio Recording
N O TE
The Return to Owner Password should be documented in a secure manner. Should it need to be reset,
all configuration settings must be reset to factory default values, and the device must then be
re-configured.
Do not set alarm volumes so low that you can't hear them in loud environments.
N O TE
184
Description
Voice prompt volume level.
Audible alarm volume level.
use.
Volume of audible beep with each QRS
complex detected.
Selects time format to display.
Displays the warning message Pacing on
Batteries if pacing using only battery power.
Defines if parameter values are displayed with
or without corresponding measurement units.
Selects the default patient category.
Identification for Return to Owner feature.
Password required in order to deactivate the
loan period setting.
Turns audio recording on or off for Manual
Defib or AED modes.
Configurable Parameters
Setting Choices
Very Soft, Soft, Medium, Loud, Very Loud
Very Soft, Soft, Medium, Loud, Very Loud
Very Soft, Soft, Medium, Loud, Very Loud
Off, Very Soft, Soft, Medium, Loud, Very Loud
12-hour, 24-hour
Yes, No
On, Off
Adult, Pedi
20 characters
4 characters
On, Off

Advertisement

Table of Contents

This manual is also suitable for:

M3535aM3536a

Comments to this Manuals

Symbols: 0
Latest comments: