Related Manuals for SOMFY Axovia multi
Summary of Contents for SOMFY Axovia multi
- Page 1 Wing gate hydraulic actuators – Installation instructions multi Mechanical assembly 5012073...
-
Page 2: Table Of Contents
Table of contents Safety instructions Make sure that the hazardous areas (crushing, shearing, wedging) between the driven part and the surrounding fixed parts due to the opening movement of the driven part are avoided. Regularly inspect the state of the gate. Those gates in poor Standard model condition should be repaired, reinforced or even changed prior to installation. -
Page 3: Mechanical Kit Composition
Mechanical kit composition Technical characteristics 1 Cover key Scope 2 Cover screw 3 Guard cover 4 Motor cover screw Maximum dimensions of a gate 5 Motor cover 6 Stop screws + arm x 10 H max. height 7 Opening stop L max. -
Page 4: Pre-Assembly Checks
(quoin) D ≥ 450 mm. For a large wing ( > 2 m ) or in windy region, SOMFY Distance should recommends installation of an beween 800 mm electric lock. - Page 5 Assembly process Mounting the fastening plate Mounting the motor on the plate Mark out a horizontal axis (AH) in the middle of the 1. Mount the fastening 2. Slide spacers 3. Position and brace, perpendicular to the gudgeons on the pillar onto the fastening fasten the motor.
- Page 6 Assembly process Unlocking the motor Assembling the arms Open the top cover using the specific Do not use a tool in order not to key. damage the rings. Unscrew the 2 screws on the bottom Assemble the arms, position the cover and remove the cover.
- Page 7 Assembly process 1 Put the arms into the closing position 2 Mount the lower closing stop The wings are in the closed position, against the Place the lower closing central closing stop. stop against the Unfold the arms in the stationary retainer direction of the gate, (opposite side to the...
- Page 8 Assembly process Wiring the 24 VDC motor Electrical connection and programming Connect the 24 VDC power supply cable to the terminal block. Pass it through the grommet and fasten it to the pillar. Re-lock the motor prior to any power-up. Refer to the AX24 control cabinet installation instructions.
- Page 9 Specific kits mounting constraints Outward opening kit For gates which open outwards. Mounting recommendation: Scope, wing characteristics Max. weight (kg) The motors' connection is inverted! The position of the arm should be exactly the same as in the drawing. Outward Short wing arm opening kit + bent arm...
- Page 10 Specific kits mounting constraints Slope opening kit For gates mounted on a slope (maximum 20%). Mounting recommendation: Scope, wing characteristics Max. weight (kg) Slope opening Max. 1216067 ref : Quoin width 1.20 The dimension B of installation is identical to the standard kit (see page 4). Fastening plate position: Motor arm 85 mm...
- Page 11 Specific kits mounting constraints Slider arm kit (compulsory lock) Kit for an opening angle of between 130 and 150°. Mounting recommendation: Scope, wing characteristics Max. weight (kg) 20 mm minimum Slider arm kit 1216066 ref : compulsory lock Max. width For an opening to 9011073 ref :...
- Page 12 Specific kits mounting constraints Slider arm kit (compulsory lock) Opening kit for small-sized quoin Mounting recommendation: Scope, wing characteristics Max. weight (kg) 320 mm Slider arm kit 1216066 ref : compulsory lock Quoin Max. width 9011073 ref : 1.20 Fastening plate position: Geleiderail 15 mm Motorarm...
- Page 13 Summary of standard kit Standard opening kit 800 mm < L < 2500 mm Scope, wing characteristics Mounting recommendation: Max. weight (kg) A < 350 mm Standard kit 1216068 ref : Standard kit Standard kit compulsory cells recommended see recommendations page 20, AX 24 9001000 lock...
- Page 14 Summary of standard kit Standard opening kit with arm steel Scope, wing characteristics Mounting recommendation: Opening < 90° Opening > 90° (Amini = 150mm) 1000 1200 1400 1600 1800 2000 2200 2400 2500 1000 1200 1400 1600 1800 2000 2200 2400 2500 BML + BPL...
- Page 15 Notes...
- Page 16 Utilisable en UE, In its concern to constantly improve its offer, SOMFY reserves the right to modify the characteristics and components of this product at any time it should be deemed useful. Usable in the EU, ©SOMFY. GMD030110 -SOMFY SAS, capital 20.000.000 Euros, RCS Bonneville 303.970.230...
Need help?
Do you have a question about the Axovia multi and is the answer not in the manual?
Questions and answers