AEG EC 4829 Instruction Manual page 35

Entertainment center
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
Charging port USB CHARGE (6)
You can use this port for example for charging your smart-
phone. Use the USB cable of your smartphone for the con-
nection.
NOTE:
• Because of the different smartphone types being of-
fered today and their different charge capacities, the
charging time depends on the smartphone being used
and its operating condition.
• Playback of audio files via this port is not possible.
Microphone operation
You may switch on the microphone for a Karaoke function in
any operating mode.
Using the microphone
NOTE:
In order to prevent an accoustic “build-up”, turn both con-
trols (MIC VOL and ECHO) anticlockwise to the left as far as
they will go. Only then plug the microphone cable into the
jack.
1. Connect the microphone with the port MIC 1 or MIC 2
(3/4).
2. Slide the switch on the microphone upward in the direc-
tion “ON”.
3. Adjust the microphone volume with the MIC VOL control
(19).
4. Use the ECHO control (18) to generate echo effects.
5. Turn off the microphone when you do not use it. Slide the
switch downward in the direction “OFF”.
CAUTION:
To avoid audio feedback (sharp whistling sound), use
the microphone outside of the speaker’ s reverberation
distance.
Guitar operation
You have the option to connect an e-guitar to the loudspeak-
er.
1. Connect your e-guitar to the GUITAR jack (2).
2. Control the guitar volume with the GUITAR VOL control
(20).
Playing back music files
You can play back your own music files in three ways: Via
cable, cordless via Bluetooth, or via the USB port.
By cable (Cable not included)
1. If required, use a suitable adapter (not included).
Connect the external device as follows:
English
35
• With a 3.5 mm jack plug cable to the AUX IN jacks (1).
2. Use the FUNC./LIGHT button (10) to select AUX mode.
3. Start the playback of your audio source. Listen to the
sound playback via the speaker.
4. For the further procedure, please refer to the user manual
of the external audio source.
NOTE:
If possible, adjust the volume of the external unit to a com-
fortable level.
Cordless via Bluetooth
Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
• Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in
your player (e.g. mobile phone). For this, refer to the
operation manual of your player.
2. Use the FUNC./LIGHT button (10) to select Bluetooth
mode. The indicator lamp PAIR flashes slowly. After a
few seconds, a peep can be heard and the indicator
lamp PAIR flashes quickly.
3. Choose the Bluetooth menu in your player and
register the device in your player. For this, refer to the
operation manual of your player. The device “AEG
EC 4829” will show in your player as a selection.
NOTE:
Only one playback unit can be connected to the
speaker. If the speaker is already connected to
another playback unit, the speaker will not appear
in the BT selection menu.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents