Playing a tape in various
You can play the tape in various functions:
• REP (Repeat Play) repeats the current track.
• BL SKIP (Blank Skip) skips blanks longer than
• ATA (Automatic Tuner Activation) turns on the
tuner automatically when fast-winding the tape.
• MTL (Metal) lets you play a metal or CrO2
During tape playback, press the
desired function button repeatedly
until "ON" in the display appears.
(5): BL SKIP
To return to normal play mode, select "OFF."
Storing and receiving stations
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
Press (SOURCE) repeatedly until
To change the band, press (MODE)
repeatedly. You can select from FM1, FM2,
FM3, MW, SW1 or SW2.
Press and hold (BTM) until "BTM"
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
While receiving the station that you
want to store, press and hold a
number button ((1) to (6)) until
If you try to store another station on the same number
button, the previously stored station will be replaced.
Receiving the stored stations
Select the band, then press a number
button ((1) to (6)).
Select the band, then press (SEEK) –/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
If you know the frequency of the station you want to
listen to, press and hold (SEEK) –/+ to locate the
approximate frequency, then press (SEEK) –/+
repeatedly to fine adjust to the desired frequency