Download  Print this page

Navigating The Device Screens; User And Provider Modes - Philips BiPAP AVAPS Service & Technical Reference Manual

Devices are intended to provide noninvasive ventilatory (niv) support to treat adult patients weighing over 30 kg (66 lbs) and pediatric patients 7 years or older and weighing over 18 kg (40 lbs).
Hide thumbs

Advertisement

P
4-4
AGE
1. Plug the device into an AC power source. The RAMP button lights up and the opening screen
momentarily appears.
2. The next screen to appear is the Home screen, shown below.
Therapy
Info
Text View
3. Turn the UI Knob to toggle between the four options. Highlight "Therapy" or the Therapy icon.
Press the UI Knob to turn on the airflow and begin therapy.
4. Press the UI Knob again to turn off therapy and return to the Home screen.
4.2 N
AVIGATING THE
In either User Mode or Provider Mode, turn the UI Knob to toggle between options and settings on the screen.
Press the UI Knob to choose an option or setting that is highlighted. If you choose "Back" on any screen, it will
take you back to the previous screen.
4.3 U
P
SER AND
The devices are equipped with the following control modes:
User Mode - The parameters that can be modified by the patient are limited.
Provider Mode - used by homecare Professionals to set the device's parameters for the patient's
needs.
Comfort
Setup
Icon View - Blower Off
F
IGURE
D
S
EVICE
CREENS
The screens shown throughout this manual are examples
only. Actual screens may vary slightly.
Your device will either display in text mode (English only) or
icon mode.
M
ROVIDER
ODES
4-2: H
S
OME
CREEN
NOTE
1118824, V
Icon Mode - Blower On
. 00
ER

Advertisement

Table of Contents

This manual is also suitable for:

Bipap s/t

Comments to this Manuals

Symbols: 0
Latest comments: