Analog Connections; Digital Connections - Philips CDR820/17 User Manual

xp CDR 820/17 eng. 30-08-2001 10:43

Analog connections

These connections are required for playback and recording via
an amplifier/receiver, equipped with an analog in- and outputs.
3
1 Connect supplied audio cord between the ANALOG
OUT-jacks on the set and the ANALOG input jacks of the
amplifier/receiver (TAPE IN, CD-R, AUX or PLAY IN).
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
2 Connect supplied audio cord between the ANALOG IN-
jacks on the set and the analog outputs of the
amplifier/receiver (CDR OUT,TAPE OUT, AUX OUT, REC
OUT etc.).
Insert the red plugs into the R jacks, and the white plugs
into the L jacks.
3 Connect all other components of your system (tape deck,
CD player, tuner, record player etc.) via their ANALOG
OUT-jacks to the appropriate analog input jacks of the
amplifier/receiver (CD IN,TUNER IN, AUX IN, PHONO
IN etc.).
Any analog device, connected to the amplifier/receiver
can now be used as recording source (
Pagina 13
RECORD PLAYER
CD PLAYER
3
AMPLIFIER/
RECEIVER
1
2
CD RECORDER
).

Digital connections

Direct digital coaxial connection
This connection is required for direct recording from a digital
coaxial source (e.g a CD player, DVD, DAT).
3
1 Connect a digital coaxial cord between the DIGITAL IN-
jack on the set and the DIGITAL OUT jack of the digital
source.
Recording can now be done via the digital coaxial input
( ).
Direct digital optical connection
This connection is required for direct recording from a digital
optical source (e.g. a CD player, DVD, DAT).
2
1 Remove the dust caps from the digital optical connections
of both source and CD recorder. Keep the caps in a safe
place.
2 Connect an optical fibre-optic cord
between the OPTICAL IN jack of the
set and the OPTICAL OUT jack of
the source.
Make sure you insert both plugs
fully, until a click is heard.
Recording can now be done via the digital optical input
( ).
Installation
CD PLAYER
CD RECORDER
CD PLAYER
CD RECORDER
13