5.
If it is necessary to replace the hard drive cable, detach the cable (3) from the front end of the hard drive.
Reverse this procedure to reassemble and install the hard drive.
RTC battery
Description
RTC battery (includes cable and double-sided adhesive)
Before removing the TouchPad cable, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Remove the battery (see
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
36
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page
33).
Spare part number
683502-001
28).