Philips Sonicare FlexCare HX6932/36 Instruction page 14

ENGLISH
14
Note: Using the Easy-start feature beyond the initial ramp-up period is not
recommended and reduces Sonicare's effectiveness in removing plaque.
Smartimer
The Smartimer indicates that your brushing cycle is complete by automatically
switching off the toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less than 2 minutes twice
a day.
Quadpacer
- The Quadpacer is an interval timer that has a short beep and pause
to remind you to brush the 4 sections of your mouth. Depending
on the brushing mode or brushing routine you have selected, the
Quadpacer beeps at different intervals during the brushing cycle.
See the 'Brushing instructions' and 'Personalising your brushing
experience' sections (Fig. 5).
The Quadpacer feature on this model has been activated. To deactivate
or reactivate the Quadpacer feature:
1 Place the handle with a brush head attached in the plugged-in charger.
2 Press and hold the personalised brushing button until:
A You hear 1 beep to indicate the Quadpacer has been deactivated.
B You hear 2 beeps to indicate the Quadpacer has been activated.
Note: The Quadpacer feature cannot be deactivated on the pre-programmed
Go Care and Max Care brushing routines.
Integrated cord wrap of UV sanitiser
1 If your Sonicare type includes the sanitiser, you can use the cord wrap
feature in the bottom of the sanitiser to store excess cord (Fig. 7).