Drawing Up Bobbin Thread; Extracción Del Hilo De La Canilla - ELNA 3004 Instruction Book

Table of Contents

Advertisement

Drawing Up Bobbin Thread

1
Raise the presser foot and hold the needle thread
lightly with your left hand.
2
Turn the handwheel slowly toward you with your right
hand until the needle goes down and continue turning
the handwheel until the take–up lever is at its highest
position.
Lightly draw up the needle thread forming a loop of
the bobbin thread.
3
Pull 15 cm (6") of both threads back and under the
presser foot.
10
Extracción del hilo de la canilla
Levante el pie prensatelas y sujete el hilo de la aguja
z
ligeramente con la mano izquierda.
Gire el volante lentamente hacia usted con la mano derecha
x
hasta que baje la aguja y continúe girando el volante hasta
que el tirahilos esté en su posición más elevada.
Tire suavemente del hilo de la aguja, formando un bucle
con el hilo de la canilla.
c
Saque unos 15 cm. (6") de ambos hilos, tirando de ellos
hacia atrás por debajo del prensatelas.
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents