Phones Tab; My Phones; Phone Settings - Cisco 8851 User Manual

PHONES TAB

MY PHONES

This tab shows you the phones associated with your account. A picture of your phone along with a listing of the extensions on the
phone is available.

PHONE SETTINGS

You may set your personal preferences by clicking on "Phone Settings".
SPEED DIALS
The 8851 phone has 5 line buttons that may either be lines or speed dials. (For example, a phone with 1 line has 4 speed dials while
a phone with 2 lines has 3 speed dials). You may set your own speed dials.
On the Phones tab, choose the Phone Settings menu on the left side. Then click Speed Dials on the right side.
Click Add New Speed Dial. You will see the following window:
Number/URI – This is the number that will be dialed when the speed dial button is pressed such as 5555 for x5555 or 95551234
to dial 555-1234. Remember to put a 9 ahead of any outside number.
Label (Description) – This is what will show up on your screen (For Example – Bob's Cell)
Speed Dial – The number you type in here will determine which speed dial button is used. Putting a 1 in this field will make this
st
your 1 speed dial button, putting a 2 would make it your 2
look like this:
NOTE: The system does not stop you from entering more speed dials than you have available here. Remember that you only have
up to 4 speed dials (fewer if you have more than 1 line on your phone). Any speed dials entered past the number you have available
on your phone will be unusable.
CISCO PHONE GUIDE 8851 | Rev 5 - 3/2016
nd
speed dial button, etc. When you are done, the screen should
12