en-us
Safety and warning
Definition
_,
WARNING:
This indicates
that death or serious injury may result
due to non-observance
of this warning.
_,
CAUTION:
This indicates
that minor or moderately
severe injury
may result due to non-observance
of this warning.
Before you switch ON the appliance
Please read the operating
and installation
instructions
carefully.
They contain important
information
on how to
install, use and maintain
the appliance.
The manufacturer
is not liable if you fail to comply
with
the instructions
and warnings.
Retain all documents
for
subsequent
use or for the next owner.
Technical
safety
The appliance
contains
a small quantity
of
environmentally
friendly
but flammable
refrigerant
R600a.
Ensure that the tubing of the refrigerant
circuit
is not damaged
during transportation
and installation.
Leaking
refrigerant
may cause
eye injuries
or ignite.
If damage
has occurred
Keep naked flames
and ignition
sources
away from
the appliance,
ventilate the room thoroughly
for several
minutes.
switch off the appliance
and pull out the mains plug,
Inform customer
service.
The more refrigerant
there is in an appliance,
the bigger
the room must be in which the appliance
is located.
If
rooms are too small, a leak may result in a flammable
gas-air
mixture.
The room must be at least 1 ms per 8 g of refrigerant.
The amount of refrigerant
in your appliance
is indicated
on the rating plate inside the appliance.
Flammable
Refrigerant
used. Risk of Fire or
Explosion.
This product
should
be repaired
only by trained
service
personnel.
Consult
repair
manual/owner's
guide
before attempting
to service this product.
All safety
precautions
must be followed.
Do not puncture
refrigerant
tubing. Follow handling
instructions
carefully.
Dispose
of properly
in accordance
with the applicable
federal
or local regulations.
If the power cord of this appliance
is damaged,
it must
be replaced
by the manufacturer,
customer
service
or a similarly
qualified
person.
Improper
installations
and repairs
may put the user at considerable
risk.
Repairs
may be performed
by the manufacturer,
customer
service
or a similarly
qualified
person
only.
Only original
parts supplied
by the manufacturer
may
be used. The manufacturer
guarantees
that only these
parts satisfy the safety requirements.