System Connections - Panasonic AG-EC4G Operating Instructionsc

AG-EC4G(VQT2H46)_EGFISJ.book 5 ページ ２００９年１０月８日 木曜日 午後４時５分
Precautions for when Connecting the System
Operation becomes possible on the
camera recorder when the power of the
unit is turned off, even if the unit is
connected.

System connections

The unit is connected to a camera recorder or base station for use.
Camera recorder
Monitor
<Notes>
Video is not output from the VIDEO OUTPUT connector of the unit when it is connected to
the base station, and the system mode is set to 1080/23.98PsF, 1080/24PsF, 1080/60i or
720/60p.
When the unit is used in combination with a base station and a camera adaptor
(AG-CA300G; optional), the included 10-pin cable cannot be used to directly connect the unit
to the camera recorder.
E-5
To REMOTE connector
To VIDEO IN
connector
BNC cable
The unit can be used in combination with
the following camera recorders and base
station.
AJ-HPX3700G, AJ-HPX3000G,
AJ-HPX2700G, AJ-HPX2000/2100,
AG-HPX500/502,
AG-HPX300/301/302/304, AJ-HDX900P/E
10-pin cable (included)
REC S/S
REW FF
ENABLE
STOP PLAY REC CHK
DISABLE
WARNING
USER MAIN 1 USER 2
RECORDER
AWB W.BAL CAM A.KNEE
B ON
A
PRST
ABB BARS OFF
SAVE MENU SHUTTER
ON SS
FIX
OFF OFF
PAINTING
ENABLE
GAIN
BLACK
CHECK M.PED
AUTO
IRIS
MAN
deg SHTR GAIN FILTER
AG-EC4G
(Continued)
To CAM/BS
connector
ECU
ON
OFF
CHARA
GAIN
UP
DOWN
SEL.
EXT