Panasonic PT-AE3000U Service Manual page 30

PT-AE3000U / PT-AE3000E
3. Click [FLTR Sensor] button.
4. When "Revision of filter sensor" window is displayed and the window will close automatically in approx. 15 minutes, the
correction is completed.
Notes:
· If the correction cannot start normally, execute it after disconnecting the power plug of the projector and switching ON
the projector again.
· Do not shut down Software for Adjustment / PC or switch OFF the projector while correcting.
· While correcting, the software version display appears (approx. 15 minutes).
30