Table of Contents
Advertisement
Change audio settings
1
Press
SETUP .
2
Select [Audio Setup] , then press OK .
3
Select and adjust the following settings:
•
[Speakers Volume] : Sets the volume
of each speaker to obtain the ideal
audio balance.
•
[Speakers Delay] : Sets the delay time
for center and rear speakers to obtain
an equal audio transmission from all
the speakers.
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.
•
[Audio Sync] : Sets a delay for audio
output when you play a video disc.
•
[ Prologic II Mode ] : Selects a 5.1
surround sound mode to suit your
video or music.
4
Press OK to confi rm your choice.
Note
•
For settings related to HDMI, the TV must be
connected through HDMI.
Change video settings
1
SETUP .
Press
2
Select [Video Setup] , then press OK .
3
Select and adjust the following settings:
•
[TV System] : Selects a TV system that
is compatible with the TV.
•
[TV Display] : Selects a picture display
format to fi t the TV screen.
•
[Picture Settings] : Selects a
predefi ned color setting.
•
[HDMI Setup] : Selects HDMI video
resolution and the wide screen display
format for the TV. The Wide Screen
Display option is only available for 16:9
wide screen TV display setting.
•
[Progressive] : Enables or disables
progressive scan mode.
•
[HD JPEG] : Enables or disables display
of high defi nition JPEG images.
4
Press OK to confi rm your choice.
Note
•
The best setting is automatically selected for
the TV. If you need to change the setting,
ensure that the TV supports the new setting.
•
Some video settings depend on the video
source, ensure that the disc and the TV
support the setting or feature.
•
For settings related to HDMI, the TV must be
connected through HDMI.
•
For settings related to progressive or
component video, the TV must be connected
through Component Video.
Change preference settings
1
SETUP .
Press
2
Select [Preference Setup] , then press OK .
3
Select and adjust the following settings:
•
[Audio] : Selects audio language for video.
•
[Subtitle] : Selects subtitle language for
video.
•
[Disc Menu] : Selects menu language
for video disc.
•
[Parental] : Restricts access to discs
that are recorded with ratings. To
play all discs irrespective of the rating,
select level ‘8’.
•
[PBC] : Displays or skips the content
menu for VCD and SVCD discs.
•
[MP3/JPEG Display] : Displays the
MP3/JPEG folders or all the fi les.
•
[Password] : Sets or changes a PIN
code to play a restricted disc. Enter
‘ 0000 ’ if you do not have a PIN or if
you have forgotten your PIN.
•
[DivX Subtitle] : Selects a character
set that supports the DivX subtitle.
•
[Version Info.] : Displays the software
version for the home theater.
•
[Default] : Resets the home theater to the
default settings programmed at the factory.
4
Press OK to confi rm your choice.
Note
•
If your preferred disc language is not available,
you can select [Others] from the list and enter
the 4-digit language code which can be found
at the back of this manual.
•
If you select a language that is not available
on a disc, the home theater uses the default
language of the disc.
•
You cannot reset disc lock, password (PIN code)
and parental control settings to their default values.
EN
Page 15
- Quick Links:
- Connect Your Home Theater
- Connect to the Tv
Hide quick links:
Advertisement
Table of Contents
