Kenwood CK 232 DFA Instructions For Use - Installation Advice page 38

RESTRAINING CHAIN
Installation to Natural Gas
Installation to Natural Gas must conform to the Code of Practice, etc .
The supply pressure for Natural Gas is 20 mbar .
The installation must conform to the relevant British/European Standards .
Installation to LP Gas
When operating on Butane gas a supply pressure of 28-30 mbar is required .
When using Propane gas a supply pressure of 37 mbar is required .
The installation must conform to the relevant British/European Standards .
Warning: Only a suitably qualified and registered installer, also with technical knowledge
of electricity should install the appliance .
He should observe the Regulations and Codes of Practice governing such installation of
gas appliances .
Note: It is recommended that the gas connection to the appliance is installed with a flexible
hose connecting tube made to BS669 or EN 14800 .
38
Chain
security
holes
Fig . 10 .1
Cooker
Back of
the cooker
Rear wall