Mounting and installation
Line and motor connections
Accessing line and motor terminals
1. Loosen the safety catch on the sides of the terminal covers using a suitable
size of flat-head screwdriver.
2. Turn the terminal cover up and allow it to engage.
FSA: 0.4 Nm...0.5 Nm
FSB: 0.55 Nm...0.6 Nm
FSC: 1.2 Nm...1.5 Nm
The Power Modules are equipped with two-part
connectors. You can remove the detachable part
of the connector from the Power Module by
pressing the unlocking device. The connectors
cannot be mixed up.
FSA: 6 Nm
FSB: 6 Nm
FSC: 13 Nm