Philips AT815 Manual page 13

Charging in Charging Stand
(AT815/AT814)
C
w Always place shaver in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom of
shaver.
w Always remove shaver from stand by lifting
straight up. Do not tilt shaver.
1 Place shaver in charging stand and connect
the small plug of cord to charging stand.
Connect the charging plug into any 100V
to 240V AC outlet. Use only the power
cord provided.
w An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
C
w The display on the shaver will indicate shaver
is charging.
2 Charging and recharging requires one full
hour. A fully charged shaver has a cordless
shaving time of up to 50 minutes.
C
w When the battery is fully charged, the
charging light lights up continuously.
After approximately 30 minutes, the battery
symbol goes out to save energy.
ENGLISH
13