Remote Alarm Terminal - Sanyo MCO-5M Instruction Manual

INCUBATOR COMPONENTS

Remote alarm terminal

The remote alarm terminal is located at the rear right side.
The remote alarm terminal is a contact output.
Normal
Abnormal , blackout : CLOSE
Contact capacity
Note:
• When the power switch is OFF or the power failure condition, the contact output is CLOSE.
• The remote alarm cannot be silenced by pressing the alarm buzzer stop key (BUZZER) since the
remote alarm is not conjunct with the BUZZER key. ( The contact output is kept even though the remote
alarm is silenced by pressing buzzer stop key (BUZZER).
Remote alarm terminal
15
: OPEN
: DC 30V, 2A
REMOTE ALARM
MAX DC30V 2A
71
Remote alarm terminal
N. O.