Table of Contents
Advertisement
Available languages
Available languages
Operational guide
FM turner controls
Selecting FM region
1. Press & hold FUNC until "LOC." appears on the screen.
2. Press
to select your FM region.
Auto search & store presets
1. Press FUNC until "SECH" appears on the screen.
2. Press
: auto search & store presets
Manual FM tuner
1. Press FUNC until "TUNE" appears on the screen.
2. Press
to tune the FM frequency in increments of 0.1MHz.
Bluetooth
General guideline for portable devices
1. Press INPUT to select Bluetooth input. The logo
2. Set you device (mobile phone, table device, MP3 player etc.,) to search and select "EDIFIER
Tick Tock BT". When the connection is made, the logo
will also appear.
3. Play your audio device.
Note: 1.
are available only for the source devices support AVRCA (Audio/Video Remote Control Profile).
2. When connecting to a Bluetooth Source device (e.g. mobile phone), make sure the source device supports A2DP
(Advanced Audio Distribution Profile).
3. PIN code for connection is "0000" if needed.
6
English
will blink.
will stop blinking and a signal indicator
General guideline for computer connection
1. Press INPUT to select the Bluetooth input. The logo
on the screen will blink.
2. Turn on your Bluetooth settings on your computer to be discoverable and enabled.
3. If your computer does not have Bluetooth built-in, connect your external Bluetooth adaptor and follow the device set up procedures.
4. Within your computer Bluetooth settings, add and search for new devices. The device name for the Tick Tock is "EDIFIER TickTock BT".
5. Select the "EDIFIER TickTock BT" device to pair/connect with. Once complete, the Bluetooth logo
blinking and a signal indicator will also appear.
6. Within your computer sound preferences, select the external speaker device/ "EDIFIER TickTock BT" as your sound output/audio
source.
For specific details about Bluetooth setup and connectivity, please refer to the user manual for your computer.
1. Press INPUT to select AUX input.
2. Press
to adjust volume.
Note:
is not available.
Reset the system
1. Mute the system: press
.
2. Press and hold FUNC to display the system version.
3. Press the
to reset the entire system.
Note: The sequence of the three steps above will reset and erase all settings and restore the unit to the original factory
default settings.
Operational guide
on the screen will be stop
7
English
- Quick Links:
- Operational Guide
Hide quick links:
Advertisement
Table of Contents
