Color Settings Tab
On the Color Settings tab, you can specify the following settings.
Select either of the following.
You can select one when Color Mode is Color or Grayscale.
Select this to vividly reproduce the tone of a document on the screen. It is recommended that you
normally select this setting.
Select this to automatically match the scanner, monitor and color printer colors, thus reducing
time and trouble to manually match the monitor and printer colors.
Color Adjustment Buttons will be disabled.
This function is available when Color Mode is Color.
- Source(Scanner): Select scanner profile.
- Target: Select target profile.
- Monitor: Select this to display preview image with optimum correction for monitor.
- Defaults: Returns to the default Color Matching settings.
Select this to disable color correction provided by ScanGear (scanner driver).
Color Matching is available when ScanGear, monitor, color management-compliant application
(such as Adobe Photoshop) and printer are set up correctly.
Refer to the corresponding manual for the monitor, printer and application settings.
By setting the gamma value of a monitor, you can adjust the input data to the brightness
Scanning with Other Application Software
ScanGear (Scanner Driver) Screens