Table of Contents
Advertisement
If you are instructed to return the rear bulkhead, follow all packaging instructions, and use any packaging
materials for shipping that are supplied to you.
Continue to "Replacing the rear bulkhead" on page 37.
Replacing the rear bulkhead
Use these instructions to install a replacement rear bulkhead on the storage expansion node.
Before you install the rear bulkhead, read "Safety" on page iii and "Installation guidelines" on page 25.
To install the rear bulkhead, complete the following steps:
Step 1.
Place the bulkhead so that the screw holes on the bulkhead are aligned with the screw holes on
the storage expansion node.
Step 2.
Using a T8 Torx screwdriver, install the five screws that secure the bulkhead, as shown in the
following illustration. Use the screws that you removed when you removed the bulkhead.
Step 3.
Install the cover on the storage expansion node (see "Installing the cover on the storage expansion
node" on page 27 for instructions).
.
Chapter 5
Removing and replacing components
37
Advertisement
Table of Contents
