Use Philips EasyLink
This product supports Philips EasyLink which uses the HDMI CEC
(Consumer Electronics Control) protocol. You can use one single remote
control to control EasyLink-compliant devices that are connected through
To enable the EasyLink feature, you must turn on the HDMI CEC operations on the
TV and on other devices connected to TV. Refer to the TVs/devices manual for details.
Press the STANDBY
The TV (if supports one-touch play) automatically turns on and
switches to the correct video-in channel.
If a disc is loaded in this product, disc play automatically starts.
Press and hold the STANDBY
more than 3 seconds.
All the connected devices (if the device supports one-touch
standby) automatically switch to standby.
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
to select a language, then press OK.
button to turn on this product.
button on the remote control for