Connecting The Vx690 To Your Wireless Network; Boarding The Terminal - Vx690; Boarding The Terminal With The Adyen App - adyen Verifone VX690 User Manual

Connecting the VX690 to your wireless network

Press
1.
Enter the security code to unlock the device.
2.
If you do not know the code, contact the
for your device.
Choose Network config
3.
Choose Setup Wi-Fi
4.
Choose Scan...
5.
The device scans for available networks.
6.
Choose the desired network you want to connect the device to.
7.
If prompted, enter the passcode to access the Wi-Fi network.
8.

Boarding the terminal - VX690

Board the terminal only after successfully following the steps in Getting Started.

Boarding the terminal with the Adyen App

Place the VX690 terminal on the cradle to charge the device and to power it on.
1.
To fully charge the terminal, place it on the cradle for at least 6 hours, until the led indicator remains lit.
Press
2.
Choose Network config
3.
Choose Setup wifi.
4.
Choose " Scan..."
a.
If your network uses a Hidden SSID, you must choose "
followed by your network password.
Choose the desired network from the list of available wireless networks and enter the password.
b.
Once the password has been entered successfully, the network will be listed under
Choose the desired network from the
c.
Press
d.
The terminal will display the message "Activating profile". Once complete, the wifi connection
should appear in the profiles list as default and active.
Press
5.
Page 4 | © 2016 Adyen BV | Confidential
+ . 9
.
.
+ 9 to open the Admin
.
to find your broadcasted wireless network.
to set the network as default.
to go back to the Network Config Menu, once the WiFi profile is activated.
Adyen POS Support Team
menu.
Profiles list and press
to obtain the specific security code
Manual... " and enter in your SSID
.
Profiles .