Side Panniers - Ducati ST3 Owner's Manual

Removing the upper and lower body panels together
Unscrew the eight fastening screws (3, fig. 56-57) that
hold headlamp fairing to the body panels.
Unscrew the front fastening screw (1, fig. 59) that holds
each body panel to the front baffle.
Unscrew the rear fastening screw (2, fig. 59) holding
each body panel to the frame.
Unscrew the two lower fastening screws (3, fig. 59)
holding the body panels to the central air conveyor.
Unscrew one of the two screws (4, fig. 59) joining the
E
body panels together. Remove the body panels.
62
2
4

Side panniers

The motorcycle comes ready to fit the side panniers.
Side panniers kit in the same colour as the motorcycle is
available from Ducati Spare Parts Department.
Kit includes all parts needed to install the panniers as
well as the relevant instructions.
fig. 58
1
3
fig. 59