Connection Using an IR Stereo Cable (sold
separately)
Make sure to connect the external remote control sensor while the product
is powered off. Then, power on the product.
Controlling more than one display product using
your remote control
•
Connect the IR OUT port on the product to the IR IN port on the other
display product using the dedicated stereo cable.
•
A command sent from the remote control pointed at product
be received by both display products
― The appearance may differ depending on the product.
Controlling more than one display product using an
external remote control sensor (sold separately)
•
A command sent from the remote control pointed at product
(to which the external remote control sensor is connected) will be
received by both display products
― The appearance may differ depending on the product.
will
1
and
.
1
2
1
and
.
1
2
IR OUT
IR IN
IR OUT
IR IN
IR IN
20