Table of Contents
Advertisement
Error code
Contents
F0BF
No playback because physical
layer cannot be detected
F600
Management
inaccessible
because
demodulation error.
F601
Unstable
sector
requested
F603
KEYDET
impossible
due
demodulation error.
F700
MBX Overflow
F701
Message
command
complete error
F702
Message command changed
F740
When HDMI device key writing
failed
F750
When the HDMI Device Key
was wrong
F890
Tried to send message during
transmission to AV task
F891
Message transmission to AV
task failed (Mailbox overflow,
etc.)
F893
Flash data falsification error
F894
EEPROM error
F895
Firm
type
disagreement
(destination mismatch)
F896
Firm type disagreement (non-
existent jumper)
F897
Incomplete initialization
F898
Disagreement between the AV
Dec hardware version and the
system controller firm type
F899
Disagreement between system
controller and panel controller
communication specifications
F8A0
Message
command
improper
0xB000
Target file was not found
0xB001
Disc is not DVD-RAM or RW
0xA002
For hang-up prevention, no
error.
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disc for protection of copyrights.
Media identification impossible
(examples)
1. Detection impossible due to inferior disc non-compliant
with specifications
2. CDV or other unsupported media
3. Disc was inserted upside down.
data
is
Data necessary for NaviPack and other navigation transfers
of
a
became impossible to acquire due to a damaged disc and
other causes, and playback transfer became impossible.
ID
was
Attempt was made to access a non-existent disc location
due to authoring record and other errors.
acquisition
Data for decrypting copyright protection (CSS) became
to
impossible to acquire due to a damaged disc or other
causes, playback is not possible.
Incorrect processing error within microcomputer
Occurs mainly in cases where microcomputer software has
a problem.
not
Incorrect processing error within microcomputer
Occurs mainly in cases where microcomputer software has
a problem.
Incorrect processing error within microcomputer
Occurs mainly in cases where microcomputer software has
a problem.
I2C error occurred while writing to Device Key in Tx.
Occurs when the wrong Device Key is written into Tx.
Player system error
Player system error
When an error is found in Flash ROM data
When accessing EEPROM failed
When the destination and type of used firm differ
When a jumper falling under no type is set
When initialization is not performed after firm writing
When the destination and type of used firm differ
Mismatch in firm/product numbers for the system controller
and panel controller used
is
Player system error
DVD-RAM disc management data error
(recorded in the DVD-VR format)
DVD disc management data error
CD mediaDisc management data error
Case of Occurrence
27
DVD-LS91EE / DVD-LS91GN / DVD-LS91GCS
Task
Remarks
Drive
Registration
ECC
Registration
ECC
Registration
ECC
Registration
AV
MSG_QOVR
AV
MSG_NOTCOMP
AV
MSG_CMDCHG
AV
AV
Disc
Player
control
software
operation is abnormal
Disc
Player
control
software
operation is abnormal
Sys
Sys
Subsite value eutered with
INITIALI.C immediately
Sys
Defined in DEFMAIN.H
Sys
Defined in DEFMAIN.H
Sys
Defined in DEFMAIN.H
Sys
Sys Panel Mounted on D9-generation
and newer models
Disc
Player
control
software
operation is abnormal
Disc
Disc
Set
when
management
data
occurs
Disc
Set for hang-up prevention
when the ISO9660 pass
table
for
CD-ROM
abnormal.
UDF
error
is
Advertisement
Table of Contents
