SoundTube IW500B Technical Information

IW500b
In-Wall Speaker
Technical Information for System Engineers
Specifications: IW500b
System Type
Impedance (nominal) 1
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M 2
Frequency Response (- 3 dB)
Frequency Response (-10 dB)
Max. Program Power
4
Max. Continuous Power RMS
Max. Power SPL @ 1 M
6
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Coverage Angle (Avg. from 2 to 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer - High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Motor-board
Grille
Inputs
Colors
Height
Width
Depth
Weight
Shipping Weight
Included Accessories
Optional Accessories
Packaging
Regulatory - UL
Regulatory - CE
Impedance listed per IEC 60268-5 with
1
a minimum less than 80% the nominal
impedance
1w1m sensitivity determined using
2
nominal impedance
Frequency response measured in half
3
or full space as dictated by speaker
mounting configuration
Max program power is 3 dB above max
4
continuous power
Continuous power rating, EIA-426-B test
5
Max output based on max continuous power
6
Max useable SPL based on testing
7
by NWAA Labs
© 2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 11.04.08
5.25" Coax, in wall, sealed (32 Watt transformer for
25/70.7/100 Volt or 8 Ohm direct)
8 ohm
87.5 dB
87.5 dB
3 140 Hz - 22 kHz
3 69 Hz - 22 kHz
150w
5 75w
106.5 dB
90º horizontal / 100º vertical
70º horizontal / 85º vertical
115º horizontal / 115º vertical
4.9 (Avg. 100 Hz - 10 kHz) / 8.3 ( 2 kHz)
6.0dB (Avg. 100 Hz - 10kHz) /9.2dB (2 kHz)
6-Position rotary switch with 8 ohm direct
1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround
25mm (1in) Convex aluminum tweeter with waveguide
25.4 mm / 1.00 in
3.0 kHz
12 dB per octave, 2nd order
12 dB per octave, 2nd order
Cast aluminum
Iridite-plated steel with powder-coat finish
Wire leads
White (only), Paintable
11.84 in / 300.7 mm
8.64 in / 219.5 mm
3.90 in / 99.1 mm
8.9 lb / 4.0 kg
11.0 lb / 5.0 kg
1 UL listed 1/2" conduit connector, 2 wire nuts, paint
mask, hole template
Preconstruction bracket (AC-IW-PCB)
1 per box
Backcan listed to UL1480
Approved
Transformers
70.7 V Output 100 V Output
33 w 102.5 dB
33 w 102.5 dB
17 w 100.0 dB
17 w 100.0 dB
9 w 97.0 dB
9 w
6 w 95.5 dB
6 w
3 w 92.5 dB

Key Features

• BroadBeam® waveguide technology deliv-
• One 133 mm (5.25 in) polypropylene
• 106.5 dB Max. SPL offers high output capa-
• Rapid installation blind-mount system for
• Easy-access 6-position tap switch for 25,
• Integrated UL-listed steel enclosure with
• Included accessories: Mounting hardware,
• Optional accessory: Pre-construction
• High-quality white paint finish. Custom
Description
speaker that delivers effective low-end
response (69 Hz, -10 dB) and optimal off-
axis performance (up to 10 kHz, EASE™
documented). SoundTube's proprietary
BroadBeam® waveguide tweeter system
delivers consistent high-performance
audio across the operating bandwidth.
The IW500b speaker design incorporates
a low-profile grille and 6-position tap
switch with an 8 Ohm bypass. Mounting
hardware is included and features a fast
and secure optimally engineered constant-
tension mounting system and an inte-
grated backcan for maximum efficiency
and applications where UL approval is
required. A pre-construction bracket is
25 V Output
offered as an optional accessory.
5 w 94.5 dB
2.5 w 91.5 dB
1.3 w 88.5 dB
97.0 dB
Applications
0.63 w 85.5 dB
95.5 dB
IW500b is ideal for music and messaging
in boardroom, church, corporate A/V and
education applications. For additional
bass response down to 41 Hz (-10 dB), the
CM1001d subwoofer may be used.
ers a consistent dispersion pattern up to
10 kHz for maximum coverage area per
speaker (EASE™ documented).
woofer and one 25 mm (1 in) convex alu-
minum tweeter with FerroFluid cooling
mounted to an M5 Motorboard.
bilities and reduced amplification costs.
quick and secure installation.
70.7 & 100 Volt applications with voice
coil/8 Ohm direct simplifies ordering &
inventory tracking.
conduit connections.
paint mask, hole template and conduit
connector.
bracket (AC-IW5-PCB).
paint colors optional.
The IW500b is a 5.25" coax in-wall loud-
Designed for in-wall applications, the