Troubleshooting - Philips Xenium x331 User Manual

Table of Contents

Advertisement

battery and packaging with standard symbols designed to promote the recycling and appropriate
disposal of your eventual waste.
:The labeled packaging material is recyclable.
:A financial contribution has been made to the associated national packaging recovery and
recycling system.
:The plastic material is recyclable (also identifies the type of plastic).
WEEE Marking in the DFU: "Information to the Consumer"
Disposal of your old product
Your product is designed and manufactured with high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC
Please inform yourself about the local separate collection system for electrical and electronic
products.
Please act according to your local rules and do not dispose of your old products with your
normal household waste. The correct disposal of your old product will help prevent potential
negative consequences for the environment and human health.
This device may contain commodities, technology or software subject to export laws and regulations
from the US and other countries. Diversion contrary to law is prohibited.
Tips
Pacemakers
If you have a pacemaker:
Always keep the phone more than 15 cm from your pacemaker when the phone is switched on,
in order to avoid potential interference.
Do not carry the phone in a breast pocket.
Use the ear opposite to the pacemaker to minimize the potential interference.
Switch off your phone if you suspect that interference is taking place.
Hearing aids
If you are a user of a hearing aid, consult your physician and hearing aid manufacturer to learn
whether your particular device is susceptible to cellular phone interference.
How to prolong the battery life of your phone
To have your mobile phone function properly, sufficient battery power is important. For the power-
saving purpose, do the following, if applicable:
Turn off the Bluetooth function of your phone.
Set the backlight level and duration of your phone to a low value.
Turn on the auto keypad lock, turn off the key sounds, tap vibration, or vibration alerts.
Establish GPRS connection when needed. Otherwise, your phone will keep searching for GPRS
connection, and drain your battery power.
Turn off your phone if there is no coverage. Otherwise, the phone will keep searching for
network, and drain your battery power.

Troubleshooting

The phone does not switch on
Remove/reinstall the battery. Then charge the phone until the battery icon stops scrolling. Unplug
the charger and try to switch the mobile on.
The display shows BLOCKED when you switch on the phone
Somebody tried to use your phone but didn't know the PIN code nor the unblocking code (PUK).
Contact your service provider.
23

Advertisement

Table of Contents
loading

Table of Contents