The Front Panel - Prodys Prontonet User Manual

The Front Panel

The front panel of the ProntoNet IP Decoder has two arrays of vu-meters and
leds that allow you to monitor the status of the unit. The leds are laid out in the
following manner:
Prontonet IP Decoder User Manual v211.doc
Chapter III
There are two vu-meters in dBFs,
one for each input channel.
CON led: When this led is on, It
indicates
connected.
FRM led: This led informs about
the synchronization status of the
decoder.
LAN: LAN physical connection.
It goes on when the unit is
connected to a LAN.
SYS: System led. It blinks during
the start
fixed at soon as the unit is ready.
12
that the unit
phase. It will light
is