Table of Contents
Advertisement
Settings menu
In the Settings menu, you can override automatic
settings and make manual adjustments to the
machine settings (A), sound settings (B) and screen
and light settings (C).
Touch the icons to activate a function or open a
list of choices. The settings are saved even after
turning off the machine.
Machine settings (A)
Owner’s name
Touch the icon to get a pop-up where you can enter
your name.
Twin needle
Touch the icon to open a list for twin needle width
selections. When a twin needle size is selected, the
width of all stitches is limited for that needle size to
prevent needle breakage. The setting is kept until
you deselect the twin needle width.
When a twin needle size is selected, a pop-up is
shown when turning on your machine. Another
warning pop-up is shown when selecting a stitch
that is too wide for the set twin needle size. The
stitch width of those stitches is automatically
adjusted to fi t the twin needle. Deselect twin needle
to go back to normal sewing.
Stitch width safety
Select this function when using a straight stitch
needle plate or a straight stitch presser foot to lock
the center needle position for all stitches to prevent
damage to the needle, presser foot or needle plate.
When turning on the machine with this setting
activated and for every stitch selection that is not
a straight stitch, a pop-up informs you that it is set
to straight stitch. Deselect stitch width safety to go
back to normal sewing.
Note: Twin needle and stitch width safety cannot be
used at the same time.
AutoSave current state
When AutoSave current state is selected, the
machine will save current state periodically
while embroidering and also when you stop
embroidering.
The information about the embroidery will be
saved even after switching the machine off.
Note: If AutoSave current state is selected it can take
longer to go from Embroidery edit to Embroidery stitch-
out.
3:8
A
B
C
Pop-up for twin
needle selection.
Advertisement
Table of Contents
