Download  Print this page

27" (68.6 Cm) Wall Oven 27 (68.6) - Kenmore L0909507 Installation Instruction

Hide thumbs

Advertisement

For typical under counter installation of an electric built-in oven see Figure below.
Only certain cooktop models may be installed over
certain built-in electric oven models. Approved cooktops
and built-in ovens are listed by the MFG ID number
and product code (see the insert sheet included in the
literature package and cooktop installation instructions
for the dimensions).
To reduce the risk of
personal
injury
and
tipping
of
the
wall
oven,
the
wall
oven
must
be secured
to
the
cabinet
(s)
by
mounting
brackets.
Approx. 3"
(7.5 cm)
Cabinet side filler panels
are necessary to isolate the
unit from adjoining cabinets.
Cabinet side filler height
should allow for installation of
)roved cooktop models
36" Min.
(91.4 cm) Min.
208/240 Volt junction box
for built-in oven.
Use 3/4" (1.9 cm) plywood, installed on
two runners, flush with toe plate. Base
must be capable of supporting 150
pounds (68 kg) for 27" models and
200 pounds (90 kg) for 30" models.
Cut an opening in wood base minimum 9" x
9" (23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armoured cable to junction box.
4 1/2" (11.5 cm) Max.*
* If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
27" (68.6 cm)
247/8'' (63.2 cm) Min.
23Y2" (59.7 cm) Min.
27¼" (69.2 cm) Min.
Wall Oven
25¼" (64.1 cm) Max.
281/2'' (72.4 cm) Max.
30" (76.2 cm)
281/2'' (72.4 cm) Min.
27¼" (69.2 cm) Min.
Wall Oven
29" (73.7 cm) Max.
23Y2" (59.7 cm) Min.
281/2" (72.4 cm) Max.
Figure 9 = TYPICAL UNDER COUNTER INSTALLATION OF A SINGLE ELECTRIC BUILT-IN OVEN
WITH AN ELECTRIC COOKTOP MOUNTED ABOVE
7

Advertisement

loading

  Related Manuals for Kenmore L0909507