Wiper Blade Check; Starter Switch Check; Weatherstrip Lubrication; Body Lubrication Service - GMC 2003 GMT560 T-Series Owner's Manual

Wiper Blade Check

Inspect wiper blades for wear or cracking. Replace
blade inserts that appear worn or damaged or that
streak or miss areas of the windshield. Also see
Cleaning the Outside of Your Vehicle on page 5-60 .

Weatherstrip Lubrication

Silicone grease on weatherstrips will make them last
longer, seal better, and not stick or squeak. Apply
silicone grease with a clean cloth. During very cold,
damp weather more frequent application may be
required. Part C tells you what to use.

Body Lubrication Service

Lubricate all exposed surfaces such as door checks,
door lock bolts, lock strike plates, door hinge bushings,
latches and dovetail bumper wedges. Where oil
holes are provided a dripless oil can be used. The seat
adjusters, seat track, door weatherstrips and rubber
cap bumpers should also be lubricated. Part C tells you
what to use. More frequent lubrication may be required
when exposed to a corrosive environment.

Parking Brake Check

Park on a fairly steep hill and hold the vehicle with the
parking brake only. This checks holding ability.

Starter Switch Check

{
CAUTION:
When you are doing this check, the vehicle
could move suddenly. If it does, you or others
could be injured. Follow the steps below.
1. Before you start, be sure you have enough room
around the vehicle.
2. Firmly apply both the parking brake and the regular
brakes. See "Parking Brake" if necessary.
Do not use the accelerator pedal, and be ready to
turn off the engine immediately if it starts.
3. On automatic transmission vehicles, try to start the
engine in each gear. The starter should work only
in PARK (P), if equipped, or NEUTRAL (N). If
the starter works in any other position, your vehicle
needs service.
6-23