Meter, Gauge, Indicator Unit
The tachometer LCD segments momentarily to it last
readings two times and segment movement is reversal.
When the terminals are connected, all the LCD segments
[A] and light (LED) [B] appear for three seconds.
If the LCD segments and warning light (LED) will not ap-
pear, replace the meter unit.
Disconnect the terminal .
All the LCD segments and warning light (LED) disappear.
If the segments do not disappear, replace the meter unit.
MODE AND RESET BUTTON Operation Check
Connect the 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
Check that the display [B] change to the ODO, TRIP,
CLOCK and STOP WATCH displays each time the mode
selector button [A] is pressed.
If the fuel level warning indicator light (LED) blinked, dis-
play change to ODO, TRIP, CLOCK, STOP WATCH and
If the display function does not work, replace the meter
Indicate the clock mode.
Check that when the RESET button in CLOCK mode is
pushed for more than two seconds, the meter display
turns to the clock set mode.
Both the hour and minute display start flashing.
In the HOUR/MINUTE setting mode, press the reset but-
ton [C] again to effect the HOUR setting mode.
The hour display flashes on the display.
Press the mode selector button [A] to set the hour.
ELECTRICAL SYSTEM 16-63