Table of Content Introduction...3 Copyright notice...4 Safety information...4 Precautions...5 In the Package...6 Specifications...7 Knowing Your PD-098-02 ...8 Name of parts...8 Inserting battery...9 Turning on the player...9 Turning off the player...9 Installing the Device...10 Installing the USB device...10 Transferring files...13 Firmware Upgrader...14 Minimum system requirement...
Page 3
Table of content Menu Settings...19 Menu settings in music mode...19 Menu settings in voice mode...20 System settings...21 Troubleshooting...23 Company Contacts...24 2 2 2 2...
Introduction Thank you for purchasing our product! PD-098-02 is an MP3 player and voice recorder which enables you to di- rectly line-in record your music to the player; WITHOUT using computer, you can enjoy digital music in a more convenient way.
Introduction Copyright notice You must be aware that distribution of MP3 files without permission from the content owner is against the copyright laws. Perception Digi- tal Ltd. and its associating companies will not be liable against such actions. Safety information This equipment has been tested and found to comply with limits for class B digital device, pursuant to part 15 of the FCC rules.
An independent license for such use is required. Some copying may require the permission of the relevant copyright owner. We do not have the authority to grant such permission. Perception Digital and its resellers will not be liable for unlawful use of the above product.
Knowing Your PD-098-02 Inserting battery Notes: If you follow the picture below to grasp the player, it is easier to handle. Turn on the player Press and hold Make sure the HOLD button switch off. If not, “LOCKED” will display for your signal. Turn off the player Press and hold (except when your player is connected to a...
Music files transfer can be done easily by simple drag- and- drop. It does not require to learn new software application. Installing the USB device: Make sure the MP3 player is unplugged from the USB port of your PC. Insert the software installation CD that comes with the MP3 player into the CDROM drive of your PC, the installation should start automatically.
Page 12
You are recommended to re-start the computer after installation is completed. After re-start the computer you can connect your MP3 player to the USB port of your PC. A “New Hardware Found” window will appear when windows tries to recognizing your player.
Page 13
Installing the Device During the process of recognize your player, the following pop- up window will appear: Simply click “Yes” to continue the process of recognizing your player. If you are using Windows XP, the following pop-up window will appear: 12 12 12 12...
RE- FORMAT it. Our MP3 player do not support WAV files downloaded or created by user. It only support WAV files recording direct from the MP3 player. 13 13...
Firmware Upgrader PD-098-02 firmware upgrader enables you to perform firmware upgrade, if new firmware is available, to enhance your PD-098-02 MP3 player or to obtain new features. You're recommended to perform firmware upgrade regularly and to go to www.perceptiondigital.com to check for new software release.
Operating controls Operating in Music Mode The following tables show all key response under different operations in music mode. Music Playing Mode Music Recording Mode...
Operating controls Operating in Voice Mode The following tables show all key response under different operations in voice mode. Voice Playing Mode Voice Recording Mode...
Detailed Controls Switching Modes The MP3 player supports two operation modes: the music mode, and the voice mode. To switch mode, press the MENU , press mode, use to select the desired mode, then press confirm. Playing Music or Voice files...
Page 19
Detailed Controls Press the REC to start recording in music mode. To stop recording, press REC again. When recording, a " " will be shown. Press pause or resume recording. Note: The default recording source is Mic-In. If you want to change the re- cording source to record music, you need to change to line-in before recording.
Menu Settings This section explains all settings which controls the functions under different modes. To change the settings, use particular item. Press to choose the desired settings. Press enter MENU under different modes to change the settings. The following table shows all key response for menu setting in differ- ent mode: MENU Others...
Menu Table Equalizers Select Normal, Rock, Classic, Jazz, Pop and User default Bass: Treble: Deleting Files Pitch Conversion PD-098-02 is equipped with a special function that al- lows you to convert the pitch of the song. You can really have fun to use this function to change the voice from a male singer to a female singer and vise versa.
Menu Table System Settings Here are all the items inside system settings To change system settings, use system setting sub-menu and press & to choose the desired settings. Press Source: This menu helps you select the recording source. Select- ing line-in means recording from line-in source while selecting mic-in means recording from the built-in mic.
Menu Table Version number: For checking the firmware version of this player. Flash light: There are 4 flash light levels, 10, 30, 60, permanent. It means the flash light will be on for 10, 30, 60 seconds or permanent when playing music or voice. Idle Time: The device will automatically power off when it is left idle for say 3 minutes .
8. Unable to find the mass stor- age device after connected to the PC. 9. How to reset MP3 Player to factory default settings. Check the capacity and the polarity of the battery. The player will automatically shut down to save power if it is left idle for 1 minute.
Company Contacts For United States: Perception Digital Service Center (Sunnytech) Toll Free Service Hotline: 1-866-661-2340 Service Fax Number: 1-408-986-8115 Service Email:ustechnical@perceptiondigital.com For International Enquiries: sales@perceptiondigital.com 24 24 24 24...
Need help?
Do you have a question about the PD-090-02 and is the answer not in the manual?
Questions and answers