How To Remove And Reinstall The Pullout Drawer - Kenmore 795.76082.600 Service Manual

3-8 HOW TO REMOVE AND REINST ALL THE PULLOUT DRAWER
3-8-1 FOLLOW STEPS TO REMOVE
Step 1) Open the freezer door.
Step 3) Remove the two screws from the guide rails (one
from each side).
Step 5) First: Remove the gear from the left side first by releasing the tab behind the gear, place a screwdriver between the
gear and the tab and pull up on the gear .
Second: Remove the center rail.
Third: Remove the gear from the right side by following the same steps for the left side.
NOTE: THIS T AB MUST BE PUSHED IN TO RELEASE THE GEAR.
Step 2) Remove the lower basket.
Step 4) Lift the freezer door up to unhook it from the rail
support and remove.
Pull both rails to full extension.
- 8 -