English - Kärcher FRV 30 Manual

Hard surface cleaner
Table of Contents

Advertisement

Please read and comply with
these original instructions prior

English

to the initial operation of your appliance and
store them for later use or subsequent own-
ers.
Safety instructions
Danger!
Risk of injury due to defective appliance.
Check the faultless condition of the appli-
ance before using it. The appliance is not
fit for use if it is not in a faultless condition.
The appliance may not be modified.
Danger!
Risk of injury due to rotation arm. Never
touch below the appliance when the high
pressure cleaner is on.
The rotation arm continues to rotate for a
while even after the high pressure cleaner
has been switched off. Wait for the rotation
arm to stop before starting any work on the
appliance.
High-pressure jets can be dangerous if im-
properly used. The jet must not be directed
at persons, animals, live electrical equip-
ment or at the appliance itself.
Please observe the safety instructions of
your high-pressure cleaner.
Use as intended
The floor cleaner, in combination with a
high pressure cleaner, is suitable for clean-
ing floors and walls.
Maximum water pressure 25 MPa (250 bar).
Maximum water temperature 60°C.
The wastewater is drained off via a hose.
Environmental protection
The packaging material can be recy-
cled. Please do not place the packag-
ing into the ordinary refuse for disposal, but
arrange for the proper recycling.
Old appliances contain valuable ma-
terials that can be recycled. Please
arrange for the proper recycling of old
appliances. Please dispose your old appli-
ances using appropriate collection sys-
tems.
Notes about the ingredients (REACH)
You will find current information about the
ingredients at:
www.kaercher.com/REACH
Nozzles packet
Note
The required packets of nozzles have been
adjusted to suit the corresponding high
pressure cleaners and must therefore be
ordered separately.
Nozzle size of the high-
pressure cleaner:
034...035
036...040
041...045
046...050
051...080
– 1
EN
Nozzle packet
2.642-430.0
2.642-431.0
2.642-432.0
2.642-433.0
2.642-982.0
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents