Sanyo Dc-MS5 Instruction Manual page 12

RECORDING
. . .
.r
T
..
. .
x..
.,
.
RI
c{
WI
jus
1.
2.
3.
4.
5.
6.
~CORDING COMPACT DISCS
~mputer recording
th computer recording, you can record a CD onto a cassene by pressing
it one button.
Load the disc(s) to be recorded.
Load a blank cassette.
Select "CD".
- For programmed recording, programme the material in advance
(as described under "PROGRAMMED PLAY").
Press the disc select button
(DISC 1,
DISC 2 or DISC 3) to select th<
d(sc to be recorded first, then press the R button.
e.
- For programmed recording, this step is unnecessa~.
'+
-.
Select" ~" mode.
%
Press the "HIGH" or "NOR" COMPU. REC button.
HIGH: For high speed recording
NOR: For normal speed recording
The system automatically performs the following functions:
Deck
- The tape rewinds to the beginning.
- Recording starts.
CD playen
. The player searches for the first track to be recorded, then enters
the pause mode.
- CD play starts.
~
Manual edit recording
Recording starts without rewinding the tape initially.
Press the EDIT/PRESET button on the remote control 10 turn
the "MANUA~ indication on before proceed step 6.
- To cancel this mode, press the button again. "MANUAL"
disappears.
- Afler loading the cassette, the tape must be wound 10 the
point where you would like to start recording.
The REC PAUSE indicator lights, "COMPU, REC" and 'A- sppear on
the dkplay as recording begins.
If the tape reverses from side A to B while a track is shll playing, the
CD player enters the pause mode at the beginning of !Pe track that
was playing, This track wdl be recorded at the begmnmg of side B.
When the end of the tape (side B) is reached, the CD player and deck
stop automatically.
If the last track on the CD plays completely Cefcre the end of Ihe
tape, disc play stops automatically. The deck a!so slojx.
Note:
Recording starts automatically after4 seconds for high speed recording
or 8 seconds for normal speed recording, so the recording will not be
interrupted by the leader tape at the beginning of sides A and B.
- A 5-second blank space is automatically recorded at the end of each
track.
- To stop computer recording at any time, press them button. The CD
player and deck will stop.
- When CD computer recording is used, repeat Play mode is canceled
automatically.
When high speed CD computer recording is used, Dolby NR recording
mode is canceled automatically.
During high speed recording, normal monitoring is not possible.
Manual recording
1.
2.
3.
4.
Follow the steps 1-3 under "Computer recording" above.
If required, press the disc select
button
(DISC 1, DISC 2 or DISC
3) to select the disc, then press the m button. Select the track
number to be recorded.
Press the REC PAUSE button. The deck enters the record pause
mode. The REC PAUSE indicator lights. Both" " and"
4"
blink on
the display.
Press the TAPE E or4button. " " or" 4" lights and recording starts.
To stop recording, press the_ button.
When the end of the tape (side B) is reached, the CD player and deck
stop automatically.
If the last track on the CD plays completely before the end of the
tape, disc play stops automatically. The deck also stops.
RECORDING FROM THE TUNER OR VIDEO INPUT
1.
2.
3.
4.
5.
6.
Load a blank cassette.
Tune in the radio station to be recorded, or play a video cassette or
video disc.
Press the REC PAUSE button. The deck enters the record pause
mode.
Press the TAPE or
4
button. Recording slam.
Press the REC PAUSE button to temporarily slop recording. Press
again the TAPE or 4 button whose " " or" +" is blinking to
continue.
Press the button to stop recording.
When beat interference is heard
A high-pitched noise called''beat" is sometimes heard during the recording
of radio broadcasts,
If this occurs,
1.
2.
Press the MEMORY button.
While "PROG." is blinking, press the "+" TUNE button to select "be-l"
or "be-2". Select the setting that gives the best results.