Download  Print this page

Refrigerator Leveling & Door Adjustment; Refrigerator Installation - Kenmore 111.7304 Use & Care Manual

Mfl63264288
Hide thumbs

Advertisement

Table of Contents
REFRIGERATOR LEVELING
& DOOR ADJUSTMENT
The refrigerator must be level in order to maintain optimal
performance and desirable front appearance.
(If the floor beneath the refrigerator is uneven, the freezer
and refrigerator doors look unbalanced.)
Leveling Refrigerator
1. Fully open the freezer drawer and remove the freezer
drawer basket to gain access to the lower toe guard
fasteners.
2. Remove the lower toe guard using a phillips
screwdriver.
NOTE: Put screws in safe location so they are not lost.
3. Using the wrench provided, turn the leveling leg
clockwise to lower and counterclockwise to raise the
front corners of the refrigerator.
Raise
Lower
4. Install lower toe guard/grille using a phillips
screwdriver.
5. Install freezer drawer basket, then open and close the
freezer drawer several times to make sure operation is
smooth without hindrance.
F706-4(영)(Kenmore)_신포맷.indd 18
1

REFRIGERATOR INSTALLATION

Adjusting a refrigerator door
If the height of the refrigerator doors is uneven, turn the
2
screw nut on the middle hinge to adjust the refrigerator
door.
1. To raise a refrigerator door turn the screw
2. To lower a refrigerator door turn the screw clockwise.
3
Adjusting the freezer drawer
If the freezer drawer is not even.
1. Loosen the two side fasteners.
Adjusting the freezer drawer
If the freezer drawer is higher on one side than the other
(not even):
2. Use the top fastener to adjust the freezer drawe
1. Loosen the two side fasteners on the side where
3. If level of freezer drawer is proper, tighten the tw
2. Use the top fastener to adjust the freezer drawer.
3. When the freezer drawer is level, tighten the two side
Front Cover
After installation and/or door leveling, fasten front
18
screws. (Remove the screws on the front bottom p
Click and screw the cover.)
Unscrew the top hinge cover and raise the pa
Do not disconnect any harness wire or water t
Loosen the fastener counterclockwise, move
sideway to adjust the refrigerator door.
Do not remove the fastener!
counterclockwise.
Tighten the fastener and replace the top hinge
Do not remove the fasteners!
adjustment is needed.
Do not remove the fasteners!
fasteners.
2
1
1
fasteners.
2016-08-29 오후 3:36:47

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Kenmore 111.7304