Download  Print this page

Kenmore 111.7304 Use & Care Manual page 15

Mfl63264288
Hide thumbs

Advertisement

Table of Contents
Reinstalling the Left Refrigerator Door
1. Lower the door onto the middle hinge.
2. Fit the top hinge over the mounting holes and align to
If the refrigerator doors are not
If the refrigerator doors are not
properly aligned:
properly aligned:
proper position before tightening.
Turn top hinge fastener clockwise to secure the hinge.
WARNING
WARNING
Connect the harness wires and water tube.
Risk of electric shock!
Risk of electric shock!
Before removing the top panel:
Before removing the top panel:
1. Shut off the water supply to the
1. Shut off the water supply to the
appliance.
appliance.
2. Unplug the appliance or switch
2. Unplug the appliance or switch
off the fuse.
off the fuse.
1. Determine which refrigerator door
1. Determine which refrigerator door
needs adjustment.
needs adjustment.
2. Remove the five screws on the top
2. Remove the five screws on the top
panel.
panel.
3. Screw top hinge cover into place with a screwdriver.
3. Raise the panel.
3. Raise the panel.
4. Loosen the screw.
4. Loosen the screw.
Do not remove the screw!
Do not remove the screw!
5. Move the hinge sideways to adjust
5. Move the hinge sideways to adjust
the refrigerator door.
the refrigerator door.
6. Tighten the screw.
6. Tighten the screw.
7. Realign panel.
7. Realign panel.
8. Insert and tighten the five screws.
8. Insert and tighten the five screws.
F706-4(영)(Kenmore)_신포맷.indd 15
REFRIGERATOR INSTALLATION
Reinstalling the Right Refrigerator Door
1. Lower the door onto the middle hinge.
2. Fit the top hinge over the mounting holes and align to
Adjusting the freezer
Adjusting the freezer
compartment drawer
compartment drawer
1. Determine which side needs
1. Determine which side needs
adjustment.
adjustment.
2. Loosen the two screws.
2. Loosen the two screws.
Do not remove the screws!
Do not remove the screws!
3. Screw top hinge cover into place with a screwdriver.
3. Use the top screw to adjust the
3. Use the top screw to adjust the
freezer compartment drawer.
freezer compartment drawer.
4. Tighten the two screws.
4. Tighten the two screws.
Installing the handles
Installing the handles
Do not install the handles until the
Do not install the handles until the
appliance is installed in its designated
appliance is installed in its designated
location and is level.
location and is level.
All handles are the same and are
All handles are the same and are
installed in the same manner.
installed in the same manner.
1. Remove the protective films from
1. Remove the protective films from
the refrigerator doors and the
the refrigerator doors and the
freezer compartment drawer.
freezer compartment drawer.
15
If the refrigerator doors are not
If the refrigerator doors are not
properly aligned:
properly aligned:
2. Insert the door handles into the
2. Insert the door handles into the
guides.
guides.
proper position before tightening.
WARNING
WARNING
Turn top hinge fastener clockwise to secure the hinge.
� Refrigerator doors: The handle
� Refrigerator doors: The handle
screws must face the center of
screws must face the center of
the appliance.
the appliance.
Risk of electric shock!
Risk of electric shock!
� Freezer compartment drawer:
� Freezer compartment drawer:
The handle screws must face
The handle screws must face
Before removing the top panel:
Before removing the top panel:
down.
down.
1. Shut off the water supply to the
1. Shut off the water supply to the
appliance.
appliance.
2. Unplug the appliance or switch
2. Unplug the appliance or switch
off the fuse.
off the fuse.
1. Determine which refrigerator door
1. Determine which refrigerator door
needs adjustment.
needs adjustment.
2. Remove the five screws on the top
2. Remove the five screws on the top
panel.
panel.
3. Raise the panel.
3. Raise the panel.
3. Tighten the handle screws with the
3. Tighten the handle screws with the
accompanying Allen wrench.
accompanying Allen wrench.
4. Loosen the screw.
4. Loosen the screw.
Do not remove the screw!
Do not remove the screw!
Installing the base plate
Installing the base plate
1. Remove the three screws on the
1. Remove the three screws on the
appliance.
appliance.
2. Mount the base plate.
2. Mount the base plate.
3. Insert the three screws and
3. Insert the three screws and
5. Move the hinge sideways to adjust
5. Move the hinge sideways to adjust
the refrigerator door.
the refrigerator door.
tighten.
tighten.
6. Tighten the screw.
6. Tighten the screw.
7. Realign panel.
7. Realign panel.
8. Insert and tighten the five screws.
8. Insert and tighten the five screws.
en-us
en-us
Adjusting the freezer
Adjusting the freezer
compartment drawer
compartment drawer
1. Determine which side needs
1. Determine which side needs
adjustment.
adjustment.
2. Loosen the two screws.
2. Loosen the two screws.
Do not remove the screws!
Do not remove the screws!
3. Use the top screw to adjust the
3. Use the top screw to adjust
freezer compartment drawer.
freezer compartment drawer
4. Tighten the two screws.
4. Tighten the two screws.
Installing the handles
Installing the handles
Do not install the handles until the
Do not install the handles until t
appliance is installed in its designa
appliance is installed in its desi
location and is level.
location and is level.
All handles are the same and are
All handles are the same and a
installed in the same manner.
installed in the same manner.
1. Remove the protective films fro
1. Remove the protective films
the refrigerator doors and the
the refrigerator doors and th
freezer compartment drawer.
freezer compartment drawer
2016-08-29 오후 3:36:44

Hide quick links:

Advertisement

Table of Contents
loading