Samsung iDCS500 Manual page 86

C C C C **************************** INDIVIDUAL TRUNKS **************************
1 1 1 1 TRUNK 2 2 2 2 TRUNK-NAME
701
702
703
704
705
706
707
708
709
710
1. TRUNK
A listing of each trunk in the system.
2. TRUNK NAME
The names of each trunk as programmed in MMC 404.
3. ATTA
Average Time To Answer for trunks is counted in the number of seconds that ringing voltage is
detected at the trunk interface and the timer stops when trunk is answered by station or device in
the system. The ATTA is the sum of all answered times divided by the answered call count.
4. ANSD
This is the number of times this specific trunk was answered by any station or device whether it is
a new call or a recall.
5. NOT-ANSD
This is the number of times this specific trunk rang the system but was not answered. These are
the same calls that would be flagged as abandoned in SMDR.
6. OUTGOING
This is the number of times this trunk was used to make an outgoing call. A valid outgoing call is
defined by the SMDR START TIME programmed in MMC 501.
7. BUSY
This is the number of times this trunk was busy when accessed by a button or dial code.
3 3 3 3 ATTA 4 4 4 4 ANSD 5 5 5 5 NOT-ANSD
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
0000 0000 0000
6 6 6 6 OUTGOING 7 7 7 7 BUSY
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
0000 0000
4-47