Samsung DMR78AHS/XAC Service Manual page 26

3. Disassembly and Reassembly
Part
Panel Control
(DMR78/77 series)
3-12
Photo Description
4. Remove the two (2) screws holding the panel control
and the display LED in place.
5. Remove the two (2) display LED connectors.
Now, you can remove the seal guide LED and the
display LED.
Caution
When reassemble the display LED, ensure to place
the seal guide LED on original location.
6. Remove the four (4) screws holding the PCB assy
and panel control in place.
7. Remove all the connectors connected to the PCB
assy.
8. Remove the two (2) screws holding the display LED
(F) and the panel control in place.
Remove the two (2) display LED (F) connectors.
Now remove the seal guide LED (F) and the display
LED (F).