Advertisement
Available languages
Available languages
1) Method of setting
Press the power button to switch the thermometer on.
Open the battery cap on the back, press the time-
setting button to start hour (hour number flashes) and
minute (minute number flashes) setting, and press the
button of scan to adjust the numbers. Press the time
set button to confirm (Refer to the Picture 6.1, 6.2).
2) Mode of display
When time has been set, the thermometer will display
the time and environmental temperature in turns while
not used to measure body temperature (Refer to the
Picture 6.3, 6.4).
Changing the Measurement Scale
The infrared thermometer can display temperature measurements in either
°C or °F.
The operation how to change the measurement scale between °C and °F
as: After all icons displaying and when the picture "--°C" or "°F--" display-
ing, please press the scan button, turn the °C or °F to °F or °C.
Wait for 3 seconds and the thermometer will automatically enter the
measurement mode.
Note:
Your thermometer provides both Fahrenheit and Celsius readings in
countries where the Fahrenheit units are adopted, otherwise it provides
only the Celsius unit. It isn't a bad one if your product can't change °C
to °F.
English
83
(Picture
6.1)
(Picture
6.2)
(Picture
6.3)
(Picture
6.4)
Advertisement
