Yamaha CD-S3000 Owner's Manual page 13

2hz to 20khz (-3db)
Hide thumbs Also See for CD-S3000:
Table of Contents

Advertisement

Available languages

Available languages

SHUFFLE key
Plays tracks on the disc in random order (shuffle
playback).
Notes
• This operation is ineffective for MP3 or WMA discs.
• The shuffle playback mode is cancelled when playback is
stopped or the disc is ejected.
8
(Search backward) key
(Search forward) key
Searches tracks backward/forward.
(Pause) key
Pauses playback. Press the
playback.
(Play) key
Starts playback.
(Skip backward) key
Press the key once to skip back to the beginning of the
current track.
Press it twice to skip to the beginning of the previous
track.
(Skip forward) key
Press the key once to skip to the next track.
(Stop) key
Stops playback.
9 SOURCE key
Selects the audio source to be played back. Each time
you press this key, the audio source is switched.
(coaxial digital input)
y
The audio source setting is retained even if you turn off this
unit.
0 PURE DIRECT key
Turns on the PURE DIRECT mode to improve audio
quality.
When this unit is in the PURE DIRECT mode:
• The PURE DIRECT indicator lights.
• No signal is output from the DIGITAL OUT
(OPTICAL and COAXIAL) jacks on the rear panel
(page 10).
• The least indicators and messages appear on the
front panel display.
or
key to resume
(optical digital input)
y
• Press this key again to turn off the PURE DIRECT mode.
• This setting is retained even if you turn off this unit.
A DISPLAY key
Switches the time display. Each time you press the
DISPLAY key during playback, the time display
changes as follows:
Elapsed time of the current track
B ENTER key
Confirms a track number entered when you are
programming tracks.
CLEAR key
Erases the last programmed track when this unit is in
the program editing mode. See "Program playback"
(page 14).
y
To erase all programmed tracks, press the CLEAR key while
programmed playback is stopped.
C LAYER key
Switches the playback layer of a hybrid Super Audio
CD between SA-CD and CD while playback is
stopped (page 27).
y
This setting is retained even if you turn off this unit.
Note
When SA-CD layer is selected, audio signals are output only
from the BALANCED OUT and ANALOG OUT jacks.
D Yamaha amplifier operation keys
Operates the Yamaha amplifier.
Refer to the owner's manual of your amplifier for
details.
Note
Some Yamaha amplifiers cannot be controlled with the keys
of this remote control.
See page 28 for more information on MP3/WMA
playback.
Remaining time of the
current track
Total remaining time of the
disc
13
En

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Cd-s2100

Table of Contents