Download  Print this page

Engine Oil And Filter; Engine Oil Change (on And After Klx250-h3/j4) - Kawasaki KLX250R Owner's Manual

D-tracker.
Hide thumbs

Advertisement

6-4 ENGINE LUBRICATION SYSTEM
Engine Oil and Filter
Engine Oil Change (On and after KLX250-H3/J4)
•Warm up the engine so that the oil will pick up any sedi-
ment and drain easily, and stop the engine.
• Place an oil pan beneath the engine.
•Remove the engine drain plug [A], and let the oil drain
completely.
NOTE
o
Hold the motorcycle upright so that the oil may drain
completely
•If the oil filter is to be changed, replace it with a new one,
•Check the gasket at the drain plug for damage.
*Replace the gasket with a new one if it is damaged.
•After the oil has completely drained out, install the drain
plug with the gasket, and tighten it.
Torque - Drain Plug: 15 N·m (1.5 kgf·m, 11.0 ft.lb)
• Fill the engine with a good quality engine oil.
•Check the oil level.
Recommended Engine Oil
Type:
(KL250-H3/J4 -, H6F)
API SE, SF or SG
API SH or SJ with JASO MA
(KL250H7F)
Viscosity:
Capacity:
Level:
API SE, SF or SG
API SH SJ or SL with JASO MA
SAE10W-40
1.3 L (1.37 4 US gt) (when filter is not
removed)
1.4 L (1.480 US gt) (when filter is removed)
1.5 L (1.586 US gt)(when engine is
completely dry)
Between upper and lower levels
NOTE
OOepending on the atmospheric temperature of your rid-
ing area, the engine oil viscosity should be changed ac-
cording to the chart.
GG05004BS1
C
SAE 1 OW-30
-20
-10
0
10
20
-4
14
32
50
68
86
104(°F)
GS09010BS1
G

Advertisement

Table of Contents

   Also See for Kawasaki KLX250R

This manual is also suitable for:

Klx250

Comments to this Manuals

Symbols: 0
Latest comments: