Download  Print this page

Carburetor; Carburetor Disassembly Note (klx250h6f -) - Kawasaki KLX250R Owner's Manual

D-tracker.
Hide thumbs

Advertisement

2-6 FUEL SYSTEM
Carburetor
Carburetor Disassembly Note (KLX250H6F -)
•Remove the carburetors.
A
WARNING
Gasoline is extremely flammable and can be ex-
plosive under certain conditions. Turn the ignition
switch to OFF. Do not smoke. Make sure the area
is well-ventilated and free from any source of flame
or sparks; this includes any appliance with a pilot
light.
•Remove the pilot screw with spring, washer and 0-ring.
OFor the United States and Canada models, remove the
pilot screw plug as follows: punch a hole in the plug and
pry there with an awl or other suitable tool.
OTurn in the pilot screw and count the number of turns until
it seats fully but not tightly, and then remove the screw.
This is to set the screw to its original position when as-
sembling.
Carburetor Assembi.~?Ji ('ffr{E50H6F -
Fuel spilled from the carburetors is hazardous.
CAUTION
Do not apply force to the jet or overtighten it, or
this could damage the jet or the carburetor body,
requiring replacement.
•Turn in the pilot screw [A] fully but not tightly, and then
back it out the same number of turns counted during dis-
assembly.
OFor the United States and Canada models, install the pilot
screw plug as follows: install a new plug [B] in the pilot
screw hole of the carburetor body [C], and apply a small
amount of a bonding agent [D] to the circumference of the
plug to fix the plug.
CAUTION
Do not apply too much bonding agent to the plug,
or the pilot screw itself may be fixed.
GC060139S1
C

Advertisement

Table of Contents

   Also See for Kawasaki KLX250R

This manual is also suitable for:

Klx250

Comments to this Manuals

Symbols: 0
Latest comments: