Download  Print this page

Ignition System; Crankshaft Sensor Inspection; Ignition Coil Inspection - Kawasaki KLX250R Owner's Manual

D-tracker.
Hide thumbs

Advertisement

Ignition System
A
WARNING
The ignition system produces extremely high volt-
age. Do not touch the spark plug, high tension coil,
or spark plug lead while the engine is running, or
you should receive a severe electrical shock.
CAUTION
Do not disconnect electrical connections while the
engine is running. This is to prevent ignition coil
damage.
Crankshaft Sensor Inspection
•Remove:
Seat
Side Cover
•Disconnect the crankshaft sensor lead connector, check
the crankshaft sensor lead resistance.
*If the tester reading is not a specified one, replace the
stator assembly.
Stator Coil Lead Resistance
Tester Range
Connections
x10
n
W/Y-G/W
Special Tool - Hand Tester: 57001-1394
Ignition Coil Inspection
•Remove the ignition coil [A].
Resistance
180 - 280
•Check the ignition coil arcing distance, primary winding
and secondary winding resistance as figures.
Ignition Coil Arcing Distance
Standard:
6 mm (0.236 in.) or more [B]
Ignition Coil Winding Resistance
Primary Winding:
1.8 - 2.8
n
[C]
Secondary Winding
10 - 16
kn
[D]
*If the tester reading is not a specified one, replace it.
Special Tool - Coil Tester: 57001-1242 [E]
Hand Tester: 57001-1394 [F]
ELECTRICAL SYSTEM 15-11
D
©
@
EB
GP100617S1
C

Advertisement

Table of Contents

   Also See for Kawasaki KLX250R

This manual is also suitable for:

Klx250

Comments to this Manuals

Symbols: 0
Latest comments: