Fig. 2. Installotion View
l i f t e r
Fasten drip pan to table with its left end even
with left end of cut-out. Fasten knee lifter bracket
in location shown in Fig. 2 Assemble it so that lifter
rod does not strike drip pan. Screw slots in bracket
provide necessary adjustment. Set stop-stud to stop
the action of knee lifter as soon as presser foot is
raised enough to trip hand lever. Screw drain pipe
into drain hole in drippan and attach oil jar as shown.
•BEFORE STARTING MACHINE
FILL TO HIGH MARK
Fig. 3. Arm Reservoir
All moving parts are lubricated from two reservoirs
enclosed in the machine.
Before storting the machine, oil reservoirs should
be filled and criticol oreos lubricated.
FILL THREAD LUBRICATOR
Fig. 5. Thread Lubrication
TO HIGH MARK
HIGH MARK H
Fig. 4. Bed Reservoir
Use Singer Oil "Type A" or "Type C" for arm
reservoir and hook saddle reservoir.
Fill machine arm reservoir to high mark on oil
sight OS indicated in Fig. 3.
The machine arm reservoir contains on oil vibra
ting pump which releases oil only when the machine
Remove oil gauge as shown in Fig. 4 and fill hook
saddle reservoir to full mark on gouge. Lubricate hook
gears and opener gears by applying a generous supply
of oil to oil holes indicated in Fig. 4.
Use Singer Oil "Type E" for thread lubricator
reservoir. Fill thread lubricator reservoir through oil
hole in face plate as shown in Fig. 5. THREAD LU
MACHINE IS OPERATING AND OFF WHEN MACHINE
IS IDLE. To increase thread lubrication, turn con
in counterclockwise direction as
From the library of: Superior Sewing Machine & Supply LLC